Menu map

For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.

Setting items

Detailed items

Description/Detailed items

Page

Quick Setup

Performs the network settings using a Wizard style window. For details on the operations, see the separate “Quick Start Guide”.

General

Language

Sets the language for display the menu.

Auto-Standby

Sets the unit power to standby when the unit is not in use.

Usage Data

Selects whether or not to send anonymous usage data to Marantz.

Firmware

Set whether or not to check for firmware update, update the firmware, and display update and upgrade notifications.

 

Check for Update

Auto-Update

Allow Update

Upgrade Notification

Add New Feature

Information

Displays notifications. Also, sets whether or not to display the notification when the power is turned on.

 

Notification Alerts

Notifications

Reset

Various settings are reset to the factory default values.

Network

Network Information

Displays various information about the network.

Network & USB-A

The network and USB memory playback (USB-A) functions can be stopped to prevent noise that affects the sound quality.

Wi-Fi

The Wi-Fi function can be stopped to prevent noise that affects the sound quality.

Bluetooth

Stopping Bluetooth function reduces a source of noise that affects sound quality, enabling higher sound quality playback.

Network Control

Performs the on/off settings for the network function when in standby mode.

Friendly Name

Edits a name displayed on the Internet.

Connection

Choose whether to connect the home network to a wireless LAN or a wired LAN.

 

Wi-Fi

Use the wireless LAN (Wi-Fi) function to connect to a network.

Auto-Scan

Share Wi-Fi setting from an iOS device

WPS Router

Manual

Wired

Use a LAN cable to connect to a network.

Settings

Used for manually setting the IP address.

DHCP

IP Address∗

Subnet Mask∗

Gateway∗

DNS∗

Save

Diagnostics

Used to check the network connection.

Physical Connection

Router Access

Internet Access

Displayed when the “DHCP” setting is “Off”.

Setting items

Detailed items

Description

Page

HEOS Account

【When the user is signed out the HEOS Account】

I have a HEOS Account

Selects to sign in.

Create Account

Creates new HEOS Account.

Forgot Password

If you have forgotten the password, an email explaining how to reset the password will be sent.

【When the user is signed in the HEOS Account】

Signed in As

Displays your HEOS Account.

Change Location

Selects your location.

Change Password

Changes your HEOS Account Password.

Delete Account

Deletes your HEOS Account.

Sign Out

Sign out of your HEOS Account.

Setting items

Detailed items

Description

Page

Audio

Filter

This unit is equipped with a sound quality adjusting function which allows users to enjoy the desired playback sound quality.

Lock Range

Narrowing down the “Lock Range” setting reduces jittering, providing clearer sound.

Variable Out

You can stop the circuit that outputs audio from the analog audio output terminals (VARIABLE) of this unit. This prevents the audio signal output from the analog audio output terminals (FIXED) from being affected.

Volume Limit

Make a setting for the maximum volume of the audio signal output from the analog audio output terminals (VARIABLE).

Digital Out

Stopping digital audio output reduces a source of noise that affects sound quality, enabling higher sound quality playback.

Phones

The headphones circuit operation can be stopped to minimize noise from the headphones circuit which could interfere with the analog audio output signal.

H/P Amplifier Gain

Set the gain of the headphone amplifier. By setting according to the impedance of your headphone, you can enjoy playing headphones at an appropriate volume.

Remote control unit illustration

Ope Menu RC001PMND

back to top