Specifications

Audio section

Analog output

[DSD]

[PCM]

Channels:

2-channel

2-channel

Playable frequency range:

2 Hz – 100 kHz

2 Hz – 96 kHz (sampling frequency: 192 kHz)

2 Hz – 20 kHz (sampling frequency: 44.1 kHz)

Playable frequency response:

2 Hz – 50 kHz (-3 dB)

2 Hz – 50 kHz (-3 dB)
(sampling frequency: 192 kHz)

2 Hz – 20 kHz (sampling frequency: 44.1 kHz)

S/N:

110 dB (Audible range)

110 dB

Dynamic range:

106 dB (Audible range)

106 dB (24 bits)

101 dB (16 bit)

Harmonic distortion:

0.0010 % (Audible range)

0.0010 % (24 bit)

0.0016 % (16 bit)

Output level

Unbalanced output (FIXED):

Unbalanced output (VARIABLE):

2.2 V RMS

4.5 V RMS (variable maximum)

2.2 V RMS

4.5 V RMS (variable maximum)

Headphone output:

30 mW / 32 Ω/ohms (variable maximum)

30 mW / 32 Ω/ohms (variable maximum)

Optical readout system

Laser:

AlGaAs

Wave length:

780 nm

Signal type:

16-bit linear PCM

Sampling frequency:

44.1 kHz

Digital output

Coaxial:

0.5 Vp-p / 75 Ω/ohms

Optical :

-15 – -21 dBm

Digital input

Coaxial:

0.5 Vp-p / 75 Ω/ohms

Optical :

–27 dBm or lator

USB (Front):

USB Type A (USB 2.0 High speed)

USB (Rear):

USB Type B (USB 2.0 High speed)

Wireless LAN section

Network type (wireless LAN standard):

Conforming to IEEE 802.11a/b/g/n
(Wi-Fi® compliant) ∗1

Security:

WEP 64 bit, WEP 128 bit

WPA/WPA2-PSK (AES)

WPA/WPA2-PSK (TKIP)

Used frequency range:

2.4 GHz, 5 GHz

The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance.

Bluetooth section

Communications system:

Bluetooth Specification Version 3.0 + EDR (Enhanced Data Rate)

Transmission power:

Bluetooth Specification Power Class 1

Maximum communication range:

Approx. 30 m in line of sight ∗2

Used frequency range:

2.4 GHz

Modulation scheme:

FHSS (Frequency-Hopping Spread Spectrum)

Supported profiles:

A2DP (Advanced Audio Distribution Profile) 1.2

AVRCP (Audio Video Remote Control Profile) 1.5

Corresponding codec:

SBC

Transmission range (A2DP):

20 Hz – 20,000 Hz

The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc.

General

Operating temperature:

+5 ℃ - +35 ℃

Power supply voltage/frequency:

AC 230 V, 50/60 Hz

Power consumption:

42 W

Power consumption in standby modes :

Standby modes

Setting item in the menu

Power consumption

Network Control
link

Normal standby

Off

0.3 W

Network control (Bluetooth) ∗3

On

3.9 W

Network control (Ethernet) ∗3

On

3.9 W

Network control (Wi-Fi) ∗3

On

4.4 W

Network control (USB) ∗3

On

4.2 W

RS-232C standby ∗4

Off

0.8 W

When this unit enters standby after audio playback using the function in parentheses.

When this unit is in standby mode by sending a standby command from the external controller via the RS-232C connector of this unit.

For the purpose of improvement, the specifications and design are subject to change without notice.

back to top