Specifications

Audio section

Analog output

[PCM]

[DSD]

Channels:

2-channels

2-channels

Playable frequency range:

2 Hz – 96 kHz

2Hz – 100kHz

Playable frequency response:

2 Hz – 96 kHz
Sampling frequency: 192 kHz
2 Hz – 20 kHz
(PCM sampling frequency: 44.1 kHz)

2 Hz – 50 kHz (–3 dB)

S/N:

110 dB (Audible range)

110 dB (Audible range)

Dynamic range:

100 dB (Audible range)

105 dB (Audible range)

Harmonic distortion:

0.0020% (1 kHz, Audible range)

0.0010% (1 kHz, Audible range)

Output level

2.1 Vrms

1.5 Vrms

H/P output level

100 mW/32 Ω/ohms (variable maximum)

70 mW/32 Ω/ohms (variable maximum)

Digital output
Optical:

-21 – -15 dBm

Wireless LAN section

Network type (wireless LAN standard):

Conforming to IEEE 802.11b
Conforming to IEEE 802.11g
Conforming to IEEE 802.11n
(Wi-Fi® compliant)∗1

Security:

WEP 64 bit, WEP 128 bit

WPA/WPA2-PSK (AES)

WPA/WPA2-PSK (TKIP)

Radio frequency:

2.4 GHz

No. of channels:

1 – 13 ch

The (Wi-Fi® CERTIFIED) Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance.

Bluetooth section

Communications system:

Bluetooth Version 2.1 + EDR (Enhanced Data Rate)

Transmission power:

Maximum 2.5 mW (Class 2)

Maximum communication range:

Approx. 10 m in line of sight∗2

Frequency band:

2.4 GHz band

Modulation scheme:

FHSS (Frequency-Hopping Spread Spectrum)

Supported profiles:

A2DP (Advanced Audio Distribution Profile) 1.2

AVRCP (Audio Video Remote Control Profile) 1.4

Corresponding codec:

SBC, AAC

Transmission range (A2DP):

20 Hz - 20,000 Hz

The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc.

General

Power supply voltage/frequency:

AC 230 V 50/60 Hz

Power consumption:

35 W

Power consumption in standby mode:

0.4 W

Power consumption in “Network Control” – “On” mode:

4.0W

For the purpose of improvement, the specifications and design are subject to change without notice.

back to top