Search result
Specifications
|
RMS Power output (Simultaneous drive of both channels) : |
100 W x 2 (8 Ω/ohms load, 1 kHz, T.H.D. 0.05 %) |
|
200 W x 2 (4 Ω/ohms load, 1 kHz, T.H.D. 0.1 %) |
|
|
Total harmonic distortion |
0.005 % |
|
Frequency response (CD, 1 W, 8 Ω/ohms load) : |
5 Hz – 50 kHz ±3 dB |
|
Damping factor (8 Ω/ohms load, 20 Hz – 20 kHz) : |
500 |
|
Input sensitivity/Input impedance |
|
|
PHONO (MC Low) : |
250 μV / 33 Ω/ohms |
|
PHONO (MC Mid) : |
250 μV / 100 Ω/ohms |
|
PHONO (MC High) : |
250 μV / 390 Ω/ohms |
|
PHONO (MM) : |
2.3 mV / 39 kΩ/kohms |
|
CD/TUNER/LINE/RECORDER : |
220 mV / 18 kΩ/kohms |
|
POWER AMP : |
1.0 V / 18 kΩ/kohms |
|
Output voltage/Output impedance |
|
|
PRE OUT : |
1.6 V / 220 Ω/ohms |
|
Maximum allowable PHONO input level (1 kHz) |
|
|
MC Low/Mid/High: |
8 mV |
|
MM : |
80 mV |
|
RIAA deviation (20 Hz – 20 kHz) : |
±0.5 dB |
|
S/N (IHF-A, 8 Ω/ohms load) |
|
|
PHONO (MC Low/Mid/High) : |
75 dB (0.5 mV Input) |
|
PHONO (MM) : |
88 dB (5 mV Input) |
|
CD/TUNER/LINE/RECORDER : |
107 dB (Rated output) |
|
Tone Control |
|
|
BASS (50 Hz) : |
±10 dB |
|
TREBLE (15 kHz) : |
±10 dB |
|
Operating temperature: |
+5 ℃ - +35 ℃ |
|
Power supply : |
AC 120 V, 60 Hz |
|
Power consumption : |
150 W |
|
Power consumption in standby mode : |
0.2 W |
For the purpose of improvement, the specifications and design are subject to change without notice.