Search result
Specifications
|
RMS Power output (Simultaneous drive of both channels) : |
250 W x 2 (8 Ω/ohms load, 20 Hz - 20 kHz, T.H.D. 0.05 %) |
|
500 W x 2 (4 Ω/ohms load, 20 Hz - 20 kHz, T.H.D. 0.05 %) |
|
|
Distortion (THD+N, CCIF IMD, DFD IMD) |
0.005 % |
|
Frequency response (CD, 1 W, 8 Ω/ohms load) : |
5 Hz - 60 kHz +0 dB/-3 dB 20 Hz - 20 kHz +0 dB/-0.3 dB |
|
Damping factor (8 Ω/ohms load, 20 Hz – 20 kHz) : |
500 |
|
Input sensitivity/Input impedance |
|
|
PHONO (MC Low) : |
400 μV / 33 Ω/ohms |
|
PHONO (MC Mid) : |
400 μV / 100 Ω/ohms |
|
PHONO (MC High) : |
400 μV / 390 Ω/ohms |
|
PHONO (MM) : |
3.6 mV / 39 kΩ/kohms |
|
BALANCED 1/BALANCED 2 : |
700 mV / 36 kΩ/kohms |
|
LINE 1/LINE 2/RECORDER : |
350 mV / 47 kΩ/kohms |
|
POWER AMP UNBALANCED : |
1.58 V / 47 kΩ/kohms |
|
POWER AMP BALANCED : |
3.16 V / 15 kΩ/kohms |
|
Output voltage/Output impedance |
|
|
PREOUT UNBALANCED : |
1.58 V / 230 Ω/ohms |
|
PREOUT BALANCED : |
3.17 V / 480 Ω/ohms |
|
Maximum allowable PHONO input level (1 kHz) |
|
|
MC : |
8 mV |
|
MM : |
80 mV |
|
RIAA deviation (20 Hz – 20 kHz) : |
±0.5 dB |
|
S/N (IHF-A, 8 Ω/ohms load) |
|
|
PHONO (MC) : |
76 dB (0.5 mV Input, 1 W Output) |
|
PHONO (MM) : |
88 dB (5 mV Input, 1 W Output) |
|
BALANCED 1/BALANCED 2 : |
122 dB (4 V Input, Rated output) |
|
LINE 1/LINE 2/RECORDER : |
122 dB (2 V Input, Rated output) |
|
Tone control |
|
|
BASS (50 Hz) : |
±10 dB |
|
TREBLE (15 kHz) : |
±10 dB |
|
Operating temperature: |
+5 ℃ - +35 ℃ |
|
Power requirement : |
AC 230 V, 50/60 Hz |
|
Power consumption : |
270 W |
|
Power consumption in standby mode : |
0.1 W |
For the purpose of improvement, the specifications and design are subject to change without notice.