Alarm

Audio from the set input source can be played back at a specified time. Use this to set playback for the same time every day, or set alarm playback on a certain day of the week. Set the current time in advance from “Clock” in the settings menu. link

Alarm 1

Alarm start time -
Repeat setting:

Enables Alarm 1.

Off:

Disables Alarm 1.

Alarm 2

Alarm start time -
Repeat setting:

Enables Alarm 2.

Off:

Disables Alarm 2.

When setting Alarm 1 or Alarm 2 for the first time after purchasing this unit, “Not Set” is displayed. Press ENTER to switch to the alarm start time setting screen. Follow steps 2 onward in “Edit Alarm” (next section).

Edit Alarm

Used to edit Alarm 1 or Alarm 2.

Use shirosankaku shirosankaku-Reverse to select Alarm 1 or Alarm 2, then press ENTER.
Use shirosankaku shirosankaku-Reverse to setting for the alarm start time, then press ENTER.
Use shirosankaku shirosankaku-Reverse to select a repeat setting, then press ENTER.

Never:

Alarm is not repeated. (single time only)

Everyday:

Alarm is repeated every day.

Weekdays:

Alarm is repeated on weekdays (Mon. to Fri.) only.

Weekends:

Alarm is repeated on weekends (Sat., Sun.) only.

Custom:

Used to set alarm on/off settings individually for each day of the week. Alarm is repeated only on days set to on.

Use shirosankaku shirosankaku-Reverse to select the input source, then press ENTER.

CD / Tuner / Optical In 1 / Optical In 2 / Analog In

When “Tuner” is selected, select a preset number.

Use shirosankaku shirosankaku-Reverse to select the volume level (0 – 100), then press ENTER.

clock lights in the display and the setting is completed.

back to top