Search result
HDMI Setup
Make settings for HDMI Audio Out, HDMI Pass Through and HDMI Control settings.
NOTE
When “HDMI Pass Through” and “HDMI Control” is set to “On”, it consumes more standby power. (HDMI Pass Throughlink, HDMI Controllink)
If you are not using this unit for an extended period, it is recommended that you unplug the power cord from the power outlet.
HDMI Audio Out
Selects the audio output speakers.
|
AVR |
Play back through speakers connected to the unit. |
|
TV: |
Play back through TV connected to the unit. |
When the HDMI Control function is activated, priority is given to the TV audio setting. link
When the power of this unit is on and “HDMI Audio Out” is set to “TV”, audio is output as 2-channel from the HDMI OUT connector.
HDMI Pass Through
Selects how this unit will transmit HDMI signals to the HDMI output in standby power mode.
|
On: |
Transmits the selected HDMI input through this unit’s HDMI output when this unit is in standby power mode. |
|
Off |
No HDMI signals are transmitted through this unit’s HDMI output in standby power mode. |
Pass Through Source
Selects the HDMI input to pass through the HDMI output when this unit is in standby power mode.
|
Last |
Selects the last used HDMI input. |
|
CBL/SAT / Media Player / |
Selects the HDMI input as the standby source. |
“Pass Through Source” can be set when any of the HDMI connectors is assigned to “CD” for the input source in the “Input Assign” setting. link
“Pass Through Source” can be set when “HDMI Control” is set to “On” or “HDMI Pass Through” is set to “On”. (HDMI Pass Throughlink, HDMI Controllink)
RC Source Select
Set whether to allow this unit to be turned on by the input source select button on the remote control when this unit is in standby power mode.
|
Power On + Source |
The power of this unit is turned on and the input source changes. |
|
Source Select Only: |
This unit remains in standby but switches the HDMI input source when you press an input source button. The power display of this unit blinks when the input source select button of the remote control is pressed. |
“RC Source Select” can be set when “HDMI Control” is set to “On” or “HDMI Pass Through” is set to “On”. (HDMI Pass Throughlink, HDMI Controllink)
HDMI Control
You can link operations with devices connected to HDMI and compatible with HDMI Control.
|
On: |
Use HDMI Control function. |
|
Off |
Do not use HDMI Control function. |
If using the HDMI Control function, connect a TV compatible with HDMI control to the HDMI OUT MONITOR 1 connector.
Please consult the operating instructions for each connected device to check the settings.
When “HDMI Control” is set to “On”, the power to this unit can be linked to the TV power and the volume of this unit can be controlled using the TV remote control.
Refer to “HDMI Control function” for more information about the HDMI Control function. link
NOTE
If the “HDMI Control” settings have been changed, always reset the power to connected devices after the change.
ARC
On the TV connected to the HDMI OUT MONITOR 1 connector, set whether to receive sound from the TV via HDMI.
|
On: |
Use ARC function. |
|
Off |
Do not use ARC function. |
If using this function, use a TV compatible with ARC (Audio Return Channel) and enable the HDMI Control function of the TV.
When “ARC” is set to “On”, the volume of this unit can be controlled using the TV remote control even when “HDMI Control” is set to “Off” on this unit.
NOTE
If the “ARC” settings have been changed, always reset the power to connected devices after the change.
Using an eARC function-compatible television enables audio playback from the speaker connected to this unit, regardless of “ARC” settings in the menu.
TV Audio Switching
Sets automatic switching to the “TV Audio” input when a TV connected via HDMI sends an appropriate CEC control command to this unit.
|
On |
Select the “TV Audio” input automatically when receiving a command from the TV. |
|
Off: |
Do not select the “TV Audio” input automatically when receiving a command from the TV. |
“TV Audio Switching” can be set when “HDMI Control” is set to “On”. link
Power Off Control
Links the power standby of this unit to external devices.
|
All |
If power to a connected TV is turned off independently of the input source, power to this unit is automatically set to standby. |
|
Video: |
With an input source being selected that is assigned “HDMI”, when you turn the power of the TV off, power to this unit is automatically set to standby. link |
|
Off: |
This unit does not link with power to a TV. |
“Power Off Control” can be set when “HDMI Control” is set to “On”. link
Power Saving
Enables the Power Saving feature of the AVR to reduce energy costs when using the TV's speakers.
This function is activated in the following cases.
When “TV Audio” is selected as the input source of this unit
When playing content from a device connected by HDMI
|
On: |
Use Power Saving feature. |
|
Off |
Do not use Power Saving feature. |
“Power Saving” can be set when “HDMI Control” is set to “On”. link