Delete saved remote control codes
Codes can be erased in three ways: by buttons, sources, and by all memory contents.
Delete remote control codes for each button
Press and hold SET until the LEARN indicator blinks.
Press input source select buttons to select the input source you want to delete.
The input source is shown in the remote control display.
Press and hold POWER 
and press the learned button to be erased twice.
and press the learned button to be erased twice.“ERASE” is shown in the remote control display.
Press SET.
The LEARN indicator turn off.
Delete remote control codes for each input source
Press and hold SET until the LEARN indicator blinks.
Press and hold POWER and press the learned input source select buttons to be erased twice.
and press the learned input source select buttons to be erased twice.“ERASE” is shown in the remote control display.
Press SET.
The LEARN indicator turn off.
Delete remote control codes for all input sources
Press and hold SET until the LEARN indicator blinks.
Press and hold POWER and press AVP twice.
and press AVP twice.“ERASE” is shown in the remote control display.
Press SET.
The LEARN indicator turn off.