Playback in ZONE2/ZONE3

Press Z2 or Z3 to select the operating zone with the remote control.

The button for the selected zone is lit.

Press POWER Power Button

to turn on the ZONE2 or ZONE3 power.

The multi zone power indicator on the display lights.

Power in ZONE2 or ZONE3 can be turned on or off by pressing ZONE2 ON/OFF or ZONE3 ON/OFF on the main unit.

Press the input source select button to select the input source to be played.

The audio signal of the selected source is output to ZONE2 or ZONE3.

You can also select ZONE2 or ZONE3 as the input source by pressing ZONE SELECT and then turning the INPUT SELECTOR.

Setting the input source of ZONE2 as the “Source” allows you to play the same content in MAIN ZONE and in ZONE2, regardless of the type of input signal.

Set the input source of ZONE2 as the “Source” by pressing the ZONE SELECT and then turning the INPUT SELECTOR.

If the MAIN ZONE input source is changed while ZONE2 is selected as the “Source”, then ZONE2’s input source will be changed to mirror the MAIN ZONE’s input source.

As well as ZONE2, you can play the same content of MAIN ZONE when the input source of ZONE3 is set as “Source”.

Adjusting the volume (ZONE2/ZONE3)

Use VOLUME kurosankaku Sankaku-Reverse to adjust the volume.

At time of purchase, “Volume Limit” is set to “70 (–10 dB)”. link

Turn VOLUME after pressing ZONE SELECT on the main unit to adjust the volume.

Turning off the sound temporarily (Muting) (ZONE2/ZONE3)

Press MUTE Silent .

The sound is reduced to the level set at “Mute Level” in the menu. link

To cancel mute, either adjust the sound volume or press MUTE Silent again.