Overview

Part names and functions

Connections

Speaker installation

Connecting a power amp

Connecting a TV

Connecting a playback device

Connecting a USB memory device to the USB port

Connecting to a home network (LAN)

Connecting an external control device

Connecting the power cord

Settings

Audyssey® Setup

Operating external devices with the remote control unit

Setting the back light

Disabling the backlight

Specifying the zone used with the remote control unit

Tips

Troubleshooting

Resetting factory settings

Resetting network settings

Restoring the firmware to the factory defaults

Appendix

Video conversion function

Playing back a USB memory devices

Playing back a Bluetooth device

Playing back a file saved on a PC or NAS

Playing back Internet Radio

Personal memory plus function

Last function memory

Explanation of terms

Trademark information

Dimensions / Weight

Disabling the backlight

Press and hold both SETUP and Light button until the DEV., TV and AVP indicators on the remote are flashing green, then release.

The backlight function can be turned on by performing step 1 again while the backlight function is off.

Audyssey® Setup

Operating external devices with the remote control unit

Setting the back light

Disabling the backlight

Specifying the zone used with the remote control unit