Speaker configuration and “Amp Assign” settings

This system configuration plays back 11-channels. You can create speaker systems such as a bi-amp connection by changing the “Amp Assign” settings.

Perform “Amp Assign” settings to suit the number of rooms and speaker configuration to be installed. link

Playback speaker in MAIN ZONE

“Amp Assign” settings

Connection page

5.1-channel playback

11.1ch (Default)

7.1-channel playback

11.1ch (Default)

9.1-channel playback

11.1ch (Default)

11.1-channel playback

11.1ch (Default)

9.1-channel playback (bi-amp connection of front speakers)

9.1ch (Bi-Amp)

9.1-channel playback + second pair of front speakers

9.1ch + Front B

The sound mode that can be selected varies according to the speaker configuration.

The following pages provide basic connection examples.

Refer to the example connection for Example connection for the Auro-3D 9.1-channel systemlink when playing Auro-3D with a 9.1-channel system using the basic 5.1-channel system and the front height and surround height speakers.
Also refer to the connection example for Example connection for the Auro-3D 10.1-channel systemlink when playing Auro-3D with a 10.1-channel system by adding the top surround speaker.

In addition to the connections described in p.link - link, this unit allows for various speaker connections with the “Amp Assign” setting.

Also refer to the menu screen in “View Terminal Config.” on the “Amp Assign” setting screen, which shows how to make connections in your environment.

GUI ViewTerminalConfig A76

back to top