Overview

Connections

Playback

Settings

Tips

Appendix

Sound modes and channel output

Circle-Large This indicates the audio output channels or surround parameters that can be set.

Double Ciecle This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.”. link

Smode & Cout A74

The applicable sound mode includes “Dolby Surround” and sound modes that have “+Dolby Surround” in the sound mode name.

The applicable sound mode includes “DTS Neural:X” and sound modes that have “+Neural:X” in the sound mode name.

A signal for each channel contained in an input signal is output as audio.

Audio is output when “Subwoofer Mode” in the menu is set to “LFE+Main”. link

Audio is not output when “Speaker Config.” - “Surr. Back” in the menu is set to “1 spkr”. link

For the best Auro-3D experience Surround Height speakers are recommended, however you may substitute Rear Height speakers from a Dolby Atmos speaker setup in place of Surround Height speakers.

This is output if an Auro-3D signal is input and the input signal contains Top Surround.

Audio is output from the speakers specified in the “Surround Parameter” – “Speaker Select” settings. link

back to top