Tips

I want the volume not to become too loud by mistake

Set the volume upper limit for “Volume Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by mistake. You can set this for each zone. (Volumelink, Volume Limitlink)

I want to keep the volume at the same level when I turn the power on

By default, the volume setting when power was previously set to standby on this unit is applied at next power on with no change. To use a fixed volume level, set the volume level at power on for “Pow.On Volume” in the menu. You can set this for each zone. (Volumelink, Pow.On Volumelink)

I want to combine a desired video with the current music

Set “Video Select” in the option menu to “On”. You can combine the current music with your desired video source from a Set-top Box or DVD, etc. while listening to music from the Tuner, CD, Phono, HEOS Music, USB or Bluetooth. link

I want to skip unused input sources

Set unused input sources for “Hide Sources” in the menu. This allows you to skip unused input sources when turning the INPUT SELECTOR knob on this unit. link

I want to enjoy the same music in all zones at the home party, etc.

Set “All Zone Stereo” in the option menu to “Start”. You can simultaneously play back music in another room (ZONE2) that is played back in MAIN ZONE. link

I want to operate this unit using the TV remote control

Select “Receiver” in a TV menu such as “Input” Flower Mark or “Operate Connected HDMI Device” Flower Mark . The Smart Menu of this unit is displayed on the TV. This Smart Menu can be operated using the remote control of your TV.

The selection method differs depending on your TV. See the owner's manual of your TV for details.

back to top