Tips

I want to listen to high sound performance playback

The Wi-Fi function can be stopped to prevent noise that affects the sound quality. Set “Disabled” to the “Wi-Fi”. link

Stopping Bluetooth function reduces a source of noise that affects sound quality, enabling higher sound quality playback. Set “Disabled” to the “Bluetooth”. link

I want to adjust the tone myself

Press the DBB/TONE button and set “Dynamic Bass Boost”, “Bass”, “Treble” and “Balance”. link

I want sound playback that is faithful to the original sound

Press the DBB/TONE button and set Source Direct to “On”. link

To display time in standby

Time is displayed in standby when the “Clock Mode” setting is “On”. link

I want to make the volume of the headphones the same as that of the speakers

You can increase the sound from the headphones at the same volume setting by changing the “H/P Amplifier Gain” settings. link

Simple operations in the power off state

When an input source select button or the Triangle Right / Pause button, FAVORITES CALL button or Triangle-Underline button on the remote control is pressed, the operation is performed at the same time as the unit switches on.

When the “Network Control” function is set to “On”, you can perform playback, or other operations through AirPlay or HEOS App. link

I want the volume not to become too loud by mistake

Set the volume upper limit for “Volume Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by mistake. link

I want to set the optimized listening environment after changing the configuration/position of the speakers or changing a speaker to a new one

Set “General” - “Speaker Configuration” in the settings menu to “Response”. link

back to top