Playing tracks in a specific order (Program playback)

Up to 25 tracks can be programmed.

In the stop mode, press PROGRAM.

“Program” is displayed on the display.

Use 0 – 9 and +10 to select the tracks.

Bracket Open Example Bracket Close

Track 4 : Press number 4 to select track 4.

Track 12 : Press numbers +10 and 2 consecutively to select track 12.

The number you enter is set about 1.5 seconds after you press the number buttons. To enter a two-digit number, be sure to press the two number buttons, one immediately after the other.

Press Triangle Right / Pause .

Playback starts in the programmed order.

When RANDOM Random is pressed during program playback, the programmed tracks are played in random order.

When REPEAT Repeat is pressed during program playback, the tracks are played repeatedly in the programmed order.

NOTE

The program is cleared when the disc tray is opened or the power is turned off.

Checking the order of the programmed tracks

In the stop mode, press Skip-Right .

The tracks are shown in the programmed order in the display each time Skip-Right is pressed.

To clear the last track programmed

In the stop mode, press CLEAR.

The last track programmed is cleared each time the button is pressed.

Clearing the all programmed track

In the stop mode, press PROGRAM.

back to top