Search result
Speaker Configuration
You can set up the Bi-Amp function, speakers to use, and the properties of speakers.
Bi-Amp
You can use the Speaker A/B terminals to output audio from speakers compatible with Bi-Amp drive.
|
Enable : |
The Bi-Amp function is enabled. |
|
Disable
|
The Bi-Amp function is disabled. You can switch between Speaker A and B. |
Response
Set the output frequency characteristics.
|
Flat
|
Properties are flat. |
|
Response1 : |
Cuts low frequencies 40 Hz or under by –12 dB/oct. |
|
Response2 : |
Cuts low frequencies 60 Hz or under by –12 dB/oct. |
|
Response3 : |
Cuts low frequencies 80 Hz or under by –12 dB/oct. |
|
Response4 : |
Cuts low frequencies 100 Hz or under by –12 dB/oct. |
“Response” setting values are not reflected in headphone out, Audio out or subwoofer out.