Playback

Connecting the speaker cables

Connect the speaker cable to the + speaker terminal (red) and the - speaker terminal (black).

Peel off about 3/8 inch (10 mm) of sheathing from the tip of the speaker cable, then twist the core wire tightly.
Conn spCable1
Turn the speaker terminal counterclockwise to loosen it.
Conne MCR611 SP cable 1
Insert the speaker cable’s core wire to the hilt into the speaker terminal.
Conne MCR611 SP cable 2
Turn the speaker terminal clockwise to tighten it.
Conne MCR611 SP cable 3

back to top