Playback

Front panel

Name Front Small MCR612 1

Cursor buttons ( shirosankaku shirosankaku-Reverse White-Arrow-Left   White-Arrow-Right )

These select items.

ENTER button

This determines the selection.

Standby indicator

Lights as follows according to unit status:

Not lit:

When powered on

During normal standby (“Auto-Play”-“Off”link)

Green: When display brightness is off link

Orange: During alarm standbylink

Red:

When “Auto-Play” is set to “On”link

When “Network Control” is set to “On”link

Display

This displays various pieces of information.

Disc tray

Used to insert a disc. link

Remote control sensor

This receives signals from the remote control unit. link

Disc tray open/close button ( Triangle-Underline )

Opens and closes the disc tray. link

System buttons

These perform playback related operations.

Name Front Small MCR612 2

Front panel illumination

Lights when the power is on. The illumination color can be changed/turned off using “Illumination” in the settings menu. link

BACK button

Returns to the previous item.

INPUT button

This selects the input source. link

Power operation button ( Power Button )

This turns the power on/off (standby). link

Volume up/down buttons (VOLUME kurosankaku Sankaku-Reverse )

Adjusts the volume. link

Headphones jack (PHONES)

Used to connect headphones.

When the headphones are plugged into this jack, audio will no longer be output from the speaker terminals, SW OUT connector and AUDIO OUT connectors.

NOTE

To prevent hearing loss, do not raise the volume level excessively when using headphones.

back to top