Playback

Sound modes and surround parameters

Smode & Spara1 N59
Smode & Spara2 N59

During playback in Pure Direct mode, the surround parameters are the same as in Direct mode.

This item can be selected when a Dolby TrueHD signal is played.

This item can be selected when a Dolby Digital, Dolby Digital Plus, Dolby TrueHD or DTS signal is played.

This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.

This item cannot be set when “Dynamic EQ” is set to “On”. link

This item cannot be set when Audyssey® Setup (Speaker Calibration) has not been performed.

This item cannot be selected when the Dolby TrueHD or DTS-HD input signal sampling frequency exceeds 96 kHz.

This item cannot be set when “MultEQ®” is set to “Off”. link

This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.

This setting is available when “Subwoofer Mode” in the menu is set to “LFE+Main”. link

This item can be set when “Front” is set to “Small” or “Subwoofer Mode” is set to “LFE+Main”. link, link

back to top