Resetting factory settings

Perform this procedure if the display is abnormal or if operations cannot be performed.

Various settings are reset to the factory default values. Make settings again.

Ope_Main_p33
Pull the power cord out of the power outlet.
Plug the power cord into a power outlet while pressing ENTER and INPUT on the main unit.
When the power indicator lights, release the buttons.

“Initialized” appears in the display.

If “Initialized” does not display in step 3, start over from step 1.

NOTE

It takes approximately 90 seconds for all of the settings to be returned to the default settings. When turning the power off, do not remove the power plug for approximately 90 seconds after “Initialized” is displayed.

back to top